asked on 1st Aug 2011 | 1 Answers | Answer It!
You have not given the details of the HDD, Operating system and where have you connected it, do you get any error message? Try these:
(a) Make suet the enclosure is not faulty.
(b) When you place the HDD inside the enclosure, make sure all the pins are ok.
(c) The power connector cable should be seated properly.
(d) If there is a power LED, make sure it’s lit up and you can hear the disk running.
(e) Try different ports.
(f) Check if mass storage services is running.
Here’s to Good Karma
asked on 6th Aug 2011 | 1 Answer
Here's to Good Karma